I’m not going to lie, I was super bummed when we bought our home a few years back and it didn’t have a fireplace. As silly as it might sound, a fireplace is such a statement piece and creates so much warmth (even with no fire, no pun intended). Christmas’ just aren’t the same without stockings hung by the fire, amiright?! As impatient as I am, I couldn’t wait for us to scrounge the money to “add” a fireplace. That’s when I decided I would create my own Antique Fireplace Mantel from a craigslist find.
You know I love antiques and anything with history.
I don’t have much of a budget to work with, so finding a great fireplace mantel was hard. It took me about 6-8 months of searching craigslist and thrift stores to find what I was looking for.
Look at my vintage fireplace mantel I found on craigslist for $160.
Here she is in her original glory!
This vintage piece of history was salvaged from an 1890’s home.
I could tell there were many many layers of paint and polyurethane that needed to be stripped off. After all, a furniture piece this old was for sure to have lots of lead paint. With my very curious 2 year old, I try my best to keep anything toxic out of our house. The first step in restoring this beauty to gather supplies and begin to strip the paint.
By the way, you can see the easiest paint stripping method in my post HERE. I promise, you will be amazed!
Disclosure; this post contains affiliate links. As an Amazon Associate I earn from qualifying purchases. This does not affect the price you pay. This disclosure statement refers to the rest of the Amazon links in this post.
Supplies to transform an antique fireplace mantel:
- Paint Stripper – I used the gel stripper that I’ve attached here. It seemed to work well to strip nearly 8 layers off.
- Plastic Scraper
- Gloves – make sure you use rubber gloves because the paint stripper will surely eat through skin!
- Sander – I’ve attached this sander because it comes with a bag to collect the dust. This is VERY important when sanding lead paint because the dust is toxic. And it makes the clean up A LOT easier.
- Paint stripper after wash – this is an important product to use to remove all the extra “gunk” that the excess stripper and old paint leaves.
I followed the instructions on the paint stripper can and began to slowly strip many many layers off of this antique mantel.
It took about 8 applications of the stripper (and waiting and sanding in between each layer) to get to the bare wood. And after we stripped all the old paint, we used the stripper cleaner to be sure the surface was free of any old sticky “gunk.” Below are some progress pictures:
The fireplace mantel pictured to the left is shown after stripping about 6 layers off.
I gave the salvaged fireplace mantel a “whitewash” look.
I still wanted to see the wood grain, but I also wanted to mute the red tones from the wood. In order to whitewash the wood, I used a mixture of 50% water to 50% white paint. I used a Valspar white paint, but any white paint will work. I applied the paint with a rag all over the mantel, and let it sit a good 20 minutes to dry. After I made sure the paint was dry, I sanded it with a fairly fine grit sandpaper.
Note: I found a great product that lightly white washes wood. It’s called Liming Wax and you can read all about it HERE.
Now that my historical antique fireplace was finished, what would I do inside the fireplace?
I wanted to create the look of birch wood in the middle. I was inspired by a photo from the infamous Magnolia Market shown below.
Supplies I used to create a faux birchwood fireplace center.
- Birch Wood – I bought 6 logs and had them cut. If I could do it over, I would have bought them already cut. I thought I could cut the slices down with a table saw, BUT in an effort not to cut our fingers off, I could not cut the logs small enough to use all the wood.
- Here is a link to birch wood that has already been sliced. Click HERE. Just an FYI; the measurements for the middle of my fireplace mantel are 30″ by 32″ and I used about 90 slices of birch wood that measured 1.5″ to 3″ in diameter.
- Black Foam Board – I chose to use black, but you can use whatever color you want.
- Green decorative moss – I used a mix of green and brown.
- Brown decorative moss
How to create a faux birchwood insert for a fireplace mantel;
- Cut the foam board to fit inside the mantel with a little overhang so you can attach it to the back of the mantel.
- Lay out your black foam board and lay the cut pieces of birchwood where you want them. Make sure you like the way it looks with even spacing.
- Hot glue the birchwood to the foam board.
- Hot glue decorative moss around it.
- Once you are happy with how it looks, fit the foam board inside the mantel and nail it to the back of the mantel.
Look at my antique fireplace mantel now!
Even though I live in a new home, I love having pieces of history too!
I’m pleased with the way my fireplace mantel turned out and I can’t wait to hang my Christmas Stockings up at Christmas time (and yes, Christmas is 10 months away!).
If you enjoyed this post I would love for you to Pin it to Pinterest HERE. Or you can just Pin the image below.
If you’re interested in seeing how I transformed the whitewash finish on this antique mantel to a chippy white finish, you can view my post HERE.
If you want to see more fun furniture transformations click my page HERE.