I know I just published a post showing you how I used two household items to refinish scratched wood, and even after I removed the scratches I still wasn’t happy with the piece. The desk I used for the post looked better after I removed the scratches, but the color just didn’t match the rest of my decor (or my style). I tossed around the idea of completely stripping the wood, but it made me tired just thinking about it. I know, that might sound silly, because I love to refinish and paint furniture. Y’all, this piece is old and has a lot of layers of stain and polyurethane and I knew it might take me days to completely strip it. Just when I was about to give up on the idea of refinishing the desk, I got a tip from a buddy on Instagram on how to strip paint, stain or polyurethane the easy way with minimal sanding. Let me tell you friends, this is a game changer.
I’ve been stripping furniture for years, and to be honest, it’s not my favorite thing to do. It’s labor intensive and time consuming and takes forever to strip all the paint, stain and polyurethane.
Like I said earlier I was about to give up on my plans to do anything else to this desk due to, well, my desire for a quick fix. Let me show you what it looked like.
It’s a solid wood antique table with a cherry finish. I love the style of the desk, but I don’t like the red finish. My choices were simple; paint it, leave it, or strip it.
Lately I’ve been finding it hard to paint over solid wood. I love the look of solid wood and I hate to hide solid wood with a paint color that I might not like in the future. I just didn’t want to hassle with stripping it. I had made up my mind that I would keep the desk as is; and then I got a tip from a buddy on Instagram (Angie) that changed everything. She said to use spray stripper on the desk and then wrap it with saran wrap and leave it overnight.
WHAT? I’ve been stripping polyurethane, paint and stain off of furniture for years, why haven’t I heard of this? Either way, I had to give it a try.
First, I needed to gather up supplies:
- plastic drop cloth
- saran wrap (I still couldn’t believe I would be using this)
- paint stripper (I used Citri Strip, I’ve attached an affiliate link below)
- paint scraper
- brillo pad or steel wool (a couple of these)
- sand paper
- electric sander (not necessary, but helpful)
- paper towels
- Klean Strip After Wash (mineral spirits or TSP work too)
Time to start Stripping the polyurethane and stain off of this antique desk.
- spray the desk with citristrip. Make sure the desk is clean before spraying it.
- cover the desk with saran wrap (there isn’t an easy way to do this, just make sure the saran wrap is up against all those curves and crevices)
- wait at least a few hours or overnight. It is better to leave it overnight.
- remove the saran wrap and use your brillo pad or scraper and scrape away the residue
- after all the residue is removed, spray a clean brillo pad or heavy paper towel with the after wash solution and wipe away any extra residue.
- start sanding
- continue sanding until you have reached your desired finish!
Here are some images from the progress:
I’ve sprayed it down with Citri Strip and covered it with saran wrap.
Below is a video I created from YouTube;
After I finished stripping most of polyurethane and stain, it was time to apply the after wash to remove the rest of the residue.
I used the electric sander for the top and some of the flat areas, but for the legs and the drawer, I used regular old sand paper and a little arm strength.
Letting the paint stripper set overnight with the saran wrap made it easy to remove the extra stain without much effort.
After most of the sanding, this is a little before and after of what the desk looked like.
I picked up some new hardware from Ace’s Hardware. I wanted to keep with the “vintage antique” vibe.
I was happy with the transformation so far, but the red tones on the drawer and the top still bothered me.
I tried using a dark wax, a “weathered” stain, and a clear wax with no luck! All these products still brought out the red tones.
After doing a little research, I decided to try to bleach the wood. This is new, I had never done this before, but I’m so glad I did.
Above is the drawer before I used the bleach.
I dabbed a little bleach on a heavy paper towel and wiped it all over the wood on the desk.
I let it sit about an hour until it was dry, and WOW!
You can see where the bleach has already dried on the wood, and where it is still wet.
After bleaching the areas of the wood that still had “red tones,” I sanded a little more, and then I was officially done!
Well there you have it; a total transformation. I’m pleased with how this desk turned out and I do think the saran wrap trick helped out A LOT. I didn’t sand near as much as I normally had to with other furniture projects I’ve completed. I’m so excited because I feel like I have a new piece of furniture, thanks to a few little tricks!
Thanks for stopping by and I hope you’ve been inspired to transform something!
If you enjoyed this post I would love for you to pin it HERE!
To see more furniture projects like this one click HERE