A polished double-curtain look is easy to create, so why don’t we use them more often for a bathroom? With two regular curtain panels, a separate waterproof liner, and a double shower-curtain rod, this creates a more cozy and higher end look. The key is to check that the panels are suitable for bathroom use and that the liner stays inside the tub or shower while you bathe.
So when I replaced my sons curtains the other day, I realized the inside of both panels had a plastic/vinyl feel. I thought, “these would be perfect in a bathroom setting.” This is when my next project began.
Disclosure; this post contains affiliate links. As an Amazon Associate I earn from qualifying purchases.This disclosure statement refers to the rest of the amazon links and other affiliate links in this post.
What you’ll need
- Two curtain panels; make sure to measure to your desired height.
- A waterproof shower liner or curtain; also make sure to measure first because you will more than likely need a longer shower liner (not the standard 72″)
- A double shower-curtain rod and its mounting hardware
- Rings or hooks compatible with both the rod and the panels if needed
- Measuring tape; a drill and level if the rod requires fixed mounting
Here is how the bathroom looked before the lovely double curtain glow up.
How to set it up
- Measure the space. Check the rod width and the distance from the rod to the floor or tub edge. Choose panels that reach near the floor without dragging. Make sure the two panels together cover the opening with some overlap in the middle.
- Install the double rod. Follow the rod manufacturer’s instructions and use a level. A tension rod may not need drilling; a fixed rod usually does. Confirm the rod is secure before hanging anything.
- Hang the liner on the inner track. Attach it with its own rings or hooks, then keep the bottom edge inside the tub or shower during use.
- Hang the two decorative panels on the outer track. Use evenly spaced rings or hooks. Position one panel on each side and let them meet or overlap slightly in the middle.
- Adjust and test. Open and close the panels, check that they don’t catch on the liner, and make sure the liner can close fully across the shower opening. Keep the decorative fabric outside the tub.
Designer tip; Hang the curtain rods and curtains higher than a normal 72″ shower curtain.
Practical tips
- Ordinary curtain fabric generally isn’t waterproof, so use the separate liner as the water barrier. Choose washable panels and wash or dry them according to their care labels.
- A double rod keeps the decorative panels separate from the liner, making it easier to open the curtains and access the liner.
- If the panels are too narrow, don’t close fully, or bunch up heavily, use wider panels or adjust the overlap.
This setup adapts the common two-panel drapery approach to a bathroom, while keeping the liner on its own track for splash protection.
Even though this space was hard to photograph (it’s so small), I hope you got a good idea of how to create your own double shower curtain for a bathroom with regular curtain panels!
Until the next project,
Lindsey**
